What sports do you have barrier netting for?
We offer barrier netting for the following sports, at these recommended nets:
- Baseball/Softball – 1 ¾” Mesh
- Soccer – 4″ Mesh
- Lacrosse – 1.5″ Mesh
- Combo Multi-Sport System – 1.5″ Lacrosse Mesh on bottom (12′); 4″ Soccer Mesh on top (8′)
What height do you recommend for barrier netting?
Recommendations for netting heights are made by sport:
- Baseball/Softball: recommendations vary depending on the location of netting.
- Soccer: 20′ overall height
- Lacrosse: 15′ overall height
- Combo Multi-Sport: 20′ overall height (12′ of lacrosse netting and 8′ of soccer netting)
What size are the poles and at what spacing?
Standard Barrier Net System: Our standard system (up to 20′ h) incorporates the use of Sch 40 4″ OD aluminum poles with ground sleeves. We recommend spacing the poles no more than 20′ on center.
Large Span Barrier Net System: For larger systems exceeding 20′ in height, we opt for steel poles. Common pole sizes can range between 8″ OD, 10″ OD, and 12″ OD depending on the size and style of the system. On some rare occasions, pole sizes bigger than 12″ OD are required. We recommend spacing the poles no more than 50′ on center.
How can this barrier netting be integrated with chain-link fence?
Setting the barrier netting system behind chain-link fence:
To implement the netting behind the fence, place the netting poles adjacent to — not within — the chain-link fence line. Typically, this is only 2-3′ behind the fence. To secure the net:
Method 1: The bottom of net is connected directly to the chain-link fence via cable ties (strongly recommend fence cap over chain-link fence to prevent damage to net).
Method 2: The bottom of the net is connected to a steel cable (via cable ties) that is anchored to and tensioned between netting poles (can be overlapped below chain-link fence on field side and/or clipped to chain-link fence with snap hooks). Example: 4′ fence height — netting brought down to 2-3′ above grade.
Integrating the barrier netting poles into the chain-link fence:
If netting support poles are to be truly integrated with a lower chain link fence, then a local fence contractor will need to be involved to provide the proper fittings and connection between Beacon barrier netting poles and chain-link fence. To secure the net:
- The bottom of net is connected directly to the chain-link fence via cable ties. We strongly recommend fence cap over chain-link fence to prevent damage to net.
Please note: We always recommend fence cap over chain-link fence to prevent damage. Click here for our Plasticap Fence Topper.
Can we hang or mount other things to the poles?
It depends upon size of the poles and the type of the barrier netting system.
For smaller diameter poles (4″ OD) used with standard barrier net systems we do not recommend attaching anything. The poles are not designed to support any additional objects or attachments. The nets need to be able to slide freely along the poles and any additional attachments could hinder this movement. Even for permanent barrier net systems, there is a risk of the netting getting caught and torn on external objects.
For larger diameter poles used with larger barrier net systems, mounting smaller items like speakers is not much of a concern. In terms of wind load, there isn’t much impact. However, the main consideration in such cases is running electricity, especially if it needs to run up inside of the pole. To accommodate this, access ports (holes) may need to be cut near the base of the pole, which can directly affect its structural integrity. In such situations, it is crucial to consult with engineering experts to ensure proposed modifications are approved and safe.
For items such as banners that will add additional wind load beyond what the netting by itself would bring, consideration by engineering is necessary. The size of the banner and its material will impact the amount of additional wind loading that needs to be carefully addressed.
How do nets lift and tension?
- Aluminum poles: Premium Harken Lifting Blocks and halyards.
- Steel poles: Winches.
What are the mounting options for barrier netting?
- Aluminum poles: Ground sleeves.
- Steel poles: Direct-bury or baseplate mount.
How are barrier netting systems shipped and what’s needed to unload?
- Poles: Ship via flatbed truck. You will need a forklift with the right load capacity to offload.
- Hardware and netting: Products are palletized and ship freight through a common carrier from various locations. You may need a forklift to offload depending on the size of your system.
Please note: Shipping methods may vary depending on the size of the order.
What is the typical lead time for barrier netting systems?
The usual timeline is about 5-6 weeks for standard barrier net systems with aluminum poles, and about 10-12 weeks for large span barrier net systems.
