Shade Structures

Sun? What sun?

1. Reduce exposure & increase comfort. Protect people from U.V. rays/overexposure and foul balls
2. Reduce deterioration rate of plastics and powder-coat finishes
3. Powerful steel frame, able to withstand hurricane force winds
4. High Density Polyethylene (CoolNet™ shade fabric) resists dirt and moisture so it won't rot or mildew, and is repairable
5. Turn-N-Slide system makes putting up and removing canopy easy. A common socket wrench and our supplied Allen wrench is all you need.

F.A.Q.

Where could I use a Shade Structure?
On your sports fields for over bleachers, over dugouts, or anywhere audience or players are. Can even be used for over playground equipment or parking lots, any outdoor gathering place!

How durable is it?
The structure was designed to withstand 150 mph hurricane force winds and has a 20-year guarantee from the manufacturer. The canopy itself is guaranteed for 10 years from the manufacturer and has passed all Fire Ratings.

How are the Shade Structures anchored?
The standard mounting is in buried concrete footings. Optional surface mount footings available.

What about vandalism?
There are no footholds or climbing rungs on the support posts, and most systems are over 10' high, far out of reach of vandals. Entire canopy replacement is only 15-20% of the total cost of the already economically priced systems. Most damages can be repaired at as low as 5% of cost.

Can the canopy be cleaned?
The canopy is naturally very resistant to dirt and moisture, but over long periods of time the fabric may begin to appear dirty or gray. It can be cleaned with a long bristled mop or brush and non-abrasive pH neutral detergent and luke warm water.

What compares to the Turn-N-Slide fastening system? Since the introduction of the patented Turn-N-Slide in 2003, the competition has been trying to emulate it. But it's in the details where they have problems.

Only the Turn-N-Slide is time-tested, used by countless municipalities nationwide and withstanding major Florida hurricanes such as Katrina and Wilma.

Only the Turn-N-Slide features a completely sealed rafter top to keep out water and debris, ensuring your structure will last for the long haul. This design spreads the load over the strength of the entire rafter, and is why the Turn-N-Slide carries a 10-year warranty. Competing mechanisms feature a slot cut into the top of the structure's rafter which allows water and debris to enter the rafter, potentially leading to corrosion and system failure.

Warranty

The equipment sold will conform in kind and quality to the specifications listed in the Order Acknowledgment and will be free of defects in workmanship or materials.

1. LIMITED 20-YEAR WARRANTY on all upright posts, and support structure frames against failure due to rust-through corrosion.
2. LIMITED 10-YEAR WARRANTY on all CoolNet shade fabric and GORE stitching thread against degradation, cracking or material breakdown resulting from ultra-violet exposure, as well as on the Turn-N-Slide easy fastening device. This warranty excludes failure of fabric or threads due to chemical erosion.
3. LIMITED 3-YEAR WARRANTY on all WeatherNet fabrics and threads against degradation, cracking or material breakdown resulting from ultra-violet exposure, mold, and mildew. This warranty excludes failure of fabric due to chemical erosion or flying or falling objects.
4. LIMITED 1-YEAR WARRANTY for structural failure of any part not covered by one of the above warranties.

Easy two step canopy removal and re-install

1. Use our special vandal-resistant tool to remove access cap.
2. Turn the concealed nut using a standard socket wrench. Attachment hook moves backward, releasing the canopy cables. Reverse steps to re-attach.

Compare our system to the competition

Why is it so easy to remove and then re-install for severe weather? Here's why:

1. Shade Structures use the Turn-N-Slide easy fastening device has an adjustable hook for accurate tensioning each time. Competing structures use a fixed hook which does not move cable binds underneath, making adjustment difficult.
2. Shade Structures has an independent cable on each side of the structure that's pre-cut and looped at the factory -- no guesswork for you in the field. Competing structures use a single length cable for the entire perimeter of the structure very difficult to adjust evenly.
3. Shade Structures requires no special tools for installing or removing your canopy just a common socket wrench and our supplied vandal-resistant hex key. Competing structures need "come-along" or other winch-type tools to tension cable.