Beacon Athletics: Batting Cages

We'll put our batting cages up against anyone.

You won't find a higher quality product, a more effective solution, or a better value for indoor or outdoor batting cages. And, when you customize your batting cage to the right fit, it can't get any better.

From storage to hitting in ten minutes.

It's that easy. With the Beacon Indoor Tensioned Batting Cage, it's a simple two person job that takes roughly 10 minutes, and you're hitting. Same with take down. To dismantle the cage, just release the three halyards, let the net drop to the ground and remove the reach poles. The support cables are flexible and part of the net so you can fold it, roll it, or toss it in a laundry bin without kinking or tangling.

Beacon Indoor Tensioned Batting Cage:

• Top quality tensioning hardware for indoor or outdoor use
• Cam lock pulleys for easy net tensioning and adjustment
• Easy setup and take down in 10 minutes
• After take down, nothing left hanging from the ceiling or across the room — no permanent frame or cable structure
• The system can be reconfigured to accommodate unusual rooms and room sizes
• Outdoor applications make quick setup and removal possible
• Golf section with custom netting on either or both ends is optional
• Cage dimensions can be altered as desired

Only heavy-wall galvanized steel will stand up to it all.

And, our heavy-duty nets are tough, too. Our frames are designed around 3" OD Schedule 40 galvanized pipe uprights. If you prefer to buy pipe locally to save on shipping costs, just let us know and we can provide the specifications.

Our nets are designed in-house at Beacon and made in the USA. They all feature heavy-duty end panels, vinyl reinforced joints, grommeted hanging points in top section (perimeter and center), two large over-flap doorways and fully grommeted bottom edge for staking. An optional lead rope can be sewn into bottom hem. Prefabricated, coated steel cables support our premium nets and speed up installation.

Beacon Batting Cages ship complete and ready to install. Standard sizes or custom designs, they're simply the best batting cages you can buy.

Feel the tension... outdoors.

Less ricochet, simplified setup. With only 3 posts at each end, the Beacon Outdoor Tensioned Batting Cage System is easy to set up and reduces ricochet. Once the 6 posts are set, it takes two people less than 20 minutes to install and tension the tunnel with the simple tensioning lever — without ladders. The removable lever helps reduce vandalism and can be stored until it's time to release the cable tension to remove the net. The end posts are specifically designed for the tension loads. An "over-tension fuse link" at each post adds further protection.

Beacon outdoor batting cages use only heavy steel posts and high-performance tunnel nets designed to fit the frame and cable support structure for this cage.

• Fast 20-minute setup and take-down
• No ladders needed
• Only 3 posts at each end
• Removable tensioning lever helps reduce vandalism
• Premium cage net with flap doorways on each end and grommeted bottom edge

Read "Batter Up", an article by Jim Myrland on batting cages.